Configuração do Real Feel Force Feedback PluginNós sabemos que o force feedback (ffb) do rFactor é pobrezinho, mas fica bastante melhor com o real feel! Infelizmente nem todos os mods são compatíveis com este plugin (apenas aqueles cujas suspensões são feitas no carfactory), e quando instalado em mods não compatíveis o resultado pode ser péssimo! Por isso antes de instalarem este plugin, certifiquem-se que o mod é compatível, alguns desses mods são: GPC’79, Caterham, EOAA GT, Historic GT, Cart Factor…
Procedimento:1- Começar por configurar o profiler do volante, no meu caso utilizo um Logitech G25 e tenho-o assim configurado:
(
Certifiquem-se que têm os pedais combinados não seleccionados e metam um visto no “activar a força central…”. Coloquem a zeros todos os outros efeitos excepto o da intensidade global, como mostra a imagem)
2- Agora vão até “C:\...\rFactor\USERDATA\
Teu_perfil” e abram o controller.ini com o notepad, e substituam isto no texto (façam copy/paste):
[ Force Feedback ]
FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Ignore Controllers="0" // Do not use FFB on: 1=controller1, 2=controller2, 4=controller3 (or add values to ignore multiple controllers)
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.00000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering
FFB steer vibe zero magnitude="0.00000" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force prediction="0.00000" // Time into the future that force is predicted, to help counteract wheel latency (0.0 to disable)
FFB steer force max change="100.00000" // Maximum change per second based on current difference between calculated and applied
FFB steer force neutral range="0.01200" // Max distance from center "neutral force" location where forces are reduced to help avoid oscillation (0.0 to disable)
FFB steer force neutral function="1.00000" // Function to apply near neutral force location, in order to tune out FFB "deadzone" but keeping oscillations in check: 0.0=original, 1.0=new
FFB steer force exponent="1.00000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction)
FFB steer force output max="0.00000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip function="0.25000" // Range 0.0 to 1.0 (previous hardcoded value was 1.0) - lower values will make steering force decrease LATER as front tire grip is lost - try 0.3
FFB steer force grip weight="1.00000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.95000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6 (previously hardcoded to 0.4). How much of a factor the front wheel grip is on the steering weight.
FFB steer front grip fract="0.75000" // Range 0.0 to 1.0 (previous hardcoded value was 0.0), additional effect of front grip loss on steering force
FFB steer update threshold="0.0001500000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="1.00000" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="1.00000" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.00000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.00000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.00000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.00000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.00000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.00000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.00000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.00000" // Rumble strip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-0.00000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.00000" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.
3- Em seguida fazer o download do
Real Feel Force Feedback Plugin.
4- Descompactar o ficheiro “RealFeelPlugin.dll” para “C:\...\rFactor\Plugins”
5- Corram o jogo e saiam deste, em seguida abram o ficheiro “RealFeelPlugin.ini” que está em “C:\...\rFactor” e comparem os dados com os que se encontram em baixo, se estiverem diferentes alterem:
[General]
RealFeelIsOn=True
ConsoleEnabled=False
ConsoleRepeatDelay=0.010000
SpeechEnabled=True
KeyRepeatDelay=0.100000
SteerForceInputMax=11500.000000
MinSpeed=0.000000
LogEnabled=False
DefaultMaxForceAtSteeringRack=-5500.000000
DefaultSteeringDamper=11500.000000
DefaultSmoothingLevel=0
6- Dentro do jogo deverão configurar a intensidade da força, em principio será um valor negativo; recomendam utilizar os efeitos em Low, eu uso High, mas é uma questão de experimentarem.
Acho que é tudo, se tiverem sugestões eu agradeço.
Podem também disponibilizar outros settings para o Force Feedback e para o Real Feel aqui nesta thread, e indiquem o volante que utilizam
Este tutorial foi baseado no manual de instruções disponibilizado no mod Historic GT para o rFactor, e em settings fornecidos pelo Ari Antero.
Thanks a lot Historix Mod Team!
Thank you Ari Antero
